Similar words: recasting, forecasting, direct pressure, pressure cooker, pressure control, diastolic pressure, combustion pressure, weather forecasting.
Random good picture Not show
(1) According counter pressure casting technique and structure of aluminum alloy wheels, designing of molding system and optimized mold has been discussed.
(2) Therefore, the optimum technologic parameters in vacuum differential pressure casting were obtained.
(3) A low pressure casting equipment has been developed, which is specially designed for the production of large-size thin-walled high-quality aluminum alloy parts with resin sand molds.
(4) The main control parameter of pressure casting machine used in neural network are analysed and presented.
(5) Low Pressure Casting Machine have emerged domestic trends, domestic low-pressure casting equipment of high-performance will replace imported equipment.
(6) The low pressure casting is the most essential method, is also the quite economical form.
(7) With the fabricated preforms , the pressure casting process of porous aluminum alloy was studied.
(8) The low - pressure casting process and die design for automobile housing were introduced.
(9) The principle to determine the technological parameters in the process of low - pressure casting was analyzed theoretically.
(10) The lubricants of casting mold used in sand transfer coating were investigated under impact pressure casting.
(11) The filling process(Sentencedict.com), microstructure and mechanical properties of A 357 alloy was studied by low pressure casting.
(12) The cleaning strainer base of 280 diesel engine in low pressure casting was discussed.
(13) Technical experiments of heavy Al - alloy pressure - tight shell casting was conducted by low pressure casting.
(14) Sample aluminum wheels of automobiles and special vehicles by counter pressure casting, have a compact microstructure inner, with fine grains, without air holes, and with no loosen.
(15) Tensile strength of sample special vehicle ZL205A aluminum alloy wheels made by counter pressure casting is with no heat crack, loosen or other defects.
(16) The graphite particulate - aluminium matrix composites are developed by compocasting pressure casting.
(17) It is a preferable way to make porous bioceramics with controllable macrostructure by integrating hot pressure casting and burning off technology of hole-making reagent.
(18) The mechanism of simulating information feedback based on concurrent design in pressure casting process was launched.
(19) Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.
(20) Production Type: Casting pattern, gravity pouring Pattern low - pressure casting pattern, Pressure casting pattern, Waxen pattern, Die - casting.
(21) The paper introduces the design and calculation of a counter pressure casting equipment, to provide the designers and users with experience and technical reference.
(22) By simulated test, the co-relationship among the slip granulometric composition, slurry deflocculation curve, mid-high pressure casting forming speed and green body shaping endurance is studied.
(23) The fluid surface forcing control system applied on counter pressure casting is built based on the combined digital valve as the main flow control component.
(24) Elongation of Al casting can be more than 10% by means of counter pressure casting, in which alloy composition and impurities contents are closely controled, and heat treating procedure is adjusted.
More similar words: recasting, forecasting, direct pressure, pressure cooker, pressure control, diastolic pressure, combustion pressure, weather forecasting, sales forecasting, bearing pressure, economic forecasting, forecasting technique, financial forecasting, forecasting techniques, pressure, pressure sore, compressure, pressure vessel, bring pressure to bear on, acupressure, bar pressure, gas pressure, oil pressure, low pressure, air-pressure, low-pressure, air pressure, overpressure, high-pressure, backpressure.